Payment & Shipping Terms:
|Flow Capacity:||335-500m3/h||Delivery Head:||113-650m|
|Inlet/Outlet Dia.:||250mm/250mm||Working Pressure:||<9.75MPa|
|Liquid Temperature:||0-80 ℃||Application:||Clean Water, Sewage, Hot Water, Corrosive Liquid, Mining Water|
|Material:||Cast Iron, Cast Steel, S.S304, S.S316, Duplex S.S2205||Dirven By:||Electric Motor / Diesel Engine|
|Seal:||Gland Packing/Mechanical Seal||Frequency:||50/60Hz|
450m3/H Centrifugal Process Pump,
Ductile Iron Centrifugal Process Pump,
Ductile Iron centrifugal sewage pump
The D series Multistage Ring Section Centrifugal Process Pump is a configured, ring section, multistage pump specifically designed for high pressure feed service in long distance water tranferring applications. A Centrifugal Process pump is one whose function is part of the process. The pump doing this type of job will be directly responsible for maintaining the continuous operation of the process.
Elastically supported plain bearings made from tungsten carbide resist extreme vibrations and shocks. A balancing drum reduces axial thrust of bearings and loads on mechanical seal for more efficient operation.
Drive side bearing, mechanical seal and balancing drum sub-assembly are all easily accessible without removing pump from the piping system, and use common parts across the range to simplify spare parts arrangement.
The first stage suction impeller that is engineered with a wider inlet diameter reducing of the velocity of the liquid for reduced friction and increased suction capability.
Parameters of Multistage Centrifugal Process Pump
|Flow Capacity||335-500 m3/h||Delivery Head||113-650 m|
|Inlet/Outlet Dia.||DN250/DN250 mm||Working Pressure||≤ 9.75 MPa|
|Liquid Temperature||0 - 80 ℃||Driven By||Electric Motor / Diesel Engine|
|Seal Type||Mechanical seal / Gland packing||Liquid||Water or similar|
|Material of Construction||Cast Iron / Cast Steel / S.S304 / S.S316 / Duplex S.S2205|
Contact Person: Johnson