Payment & Shipping Terms:
|Flow Capacity:||1368-3096m3/h||Delivery Head:||49-98m|
|Inlet/Outlet Dia.:||500/400mm||Working Pressre:||<1.5MPa|
|Liquid Temperature:||0-80 ℃||Application:||Clean Water, Sewage, Hot Water, Corrosive Liquid, Mining Water|
|Material:||Cast Iron, Cast Steel, S.S304, S.S316, Duplex S.S2205||Driven By:||Electric Motor / Diesel Engine|
|Seal:||Gland Packing/Mechanical Seal||Frequency:||50 /60 Hz|
98m Single Stage Double Suction Centrifugal Pump,
Double Suction Centrifugal Pump 3096m3/H,
Single Stage water pump 3096m3/H
Double Suction Horizontal Split Case Centrifugal Water Pump COS400-560 (1368-3096m3/h @ 49-98m)
COS Series pumps are double suction horizontal split case centrifugal pump, they are single-stage, double suction, horizontally mounted, applied for general water supply, booster service, municipal waterworks, condenser cooling, water circulation, industrial service, building service, chemical plant, power plants etc.
The split case pump is the right choice for a wide range of applications with medium to high flow rates. The optimized design of the split case pump ensures high efficiency and durability.
The shapes of impeller and pump casings are optimized to achieve the highest possible efficiency for the specific design flow rate and pressure head. Off design characteristics are optimized to give each pump a wide operating range, ensuring that cavitation limits are not exceeded.
The pumps are easy to maintain as the upper half can be removed without dismantling pipe connections and driver components so that the alignment is not disturbed. In addition, our service department offers financially attractive service and maintenance contracts, which guarantee that downtime in pumping installations is kept to a minimum.
* Axially split casing – rotating element can be removed without disturbing pipework
* Exceptional hydraulic efficiencies
* Double and single entry back to back impellers reduce end thrust, increase efficiency and bearing life
* Modular design for maximum interchangeability. Multiple impeller selections
* Stainless steel impellers and shaft as standard
* Internal high efficiency coating as standard
* Cartridge mechanical seals as standard
* Double row thrust bearing
* Wide operating range and extended bearing life
* Reduced efficiency degradation
* Approved to FM and/or UL standards
* In compliance with NFPA 20
* Used in pump as turbine application
Split-case pumps are the workhorses of industrial and municipal applications. They are more expensive than end-suction or vertical inline pumps, and not as flexible or adaptable as vertical turbines. However, what they lack in low-cost flexibility they make up for in durability, efficiency, and dependability.
A split-case pump, properly installed, designed, and operated, can provide decades of service.Most split-case pumps are axially-split – meaning that the flange at which the pump casing separates is in the same plane as the pump axis. Radially-split pumps are also available, and are commonly used in very high-pressure and high-temperature industrial applications (boiler-feed pumps are one common application for radially-split pumps).
The diagram and images shown on this page are for the more run-of-the-mill axially-split variety that are used extensively in municipal water, industrial, oil & gas, and mining applications.
While split-case pumps are typically mounted horizontally, as shown in these images, it is no unheard of for split-case pumps to be mounted vertically, and a few manufacturers offer specialized bases and casings designed for this arrangement. However, most manufacturers simply adapt a standard horizontal design for vertical mounting – a practice that is not without safety concerns and, as a result, a fair share of detractors.
Parameters of COS400-560
|Flow Capacity||1368-3096 m3/h||Delivery Head||49-98 m|
|Inlet/Outlet Dia.||500/400 mm||Working Pressure||≤ 1.5 MPa|
|Liquid Temperature||0 - 80 ℃||Driven By||Electric Motor / Diesel Engine|
|Seal Type||Mechanical seal / Gland packing||Liquid||Clean water or similar|
|Material of Construction||Cast Iron / Cast Steel / S.S304 / S.S316 / Duplex S.S2205|
Water supply and booster stations.
Water purification processes.
Fire fighting systems.
Industrial and public applications.
Marine and metallurgy sectors, power plants.
Agricultural irrigation systems.
General application in refineries
Contact Person: Johnson