Payment & Shipping Terms:
|Flow Capacity:||55-100m3/h||Delivery Head:||78-459m|
|Inlet/Outlet Dia.:||100mm/100mm||Working Pressure:||<6.88MPa|
|Liquid Temperature:||0-80 ℃||Application:||Clean Water, Sewage, Hot Water, Corrosive Liquid, Mining Water|
|Material:||Cast Iron, Cast Steel, S.S304, S.S316, Duplex S.S2205||Dirven By:||Electric Motor / Diesel Engine|
|Seal:||Gland Packing/Mechanical Seal||Frequency:||50/60Hz|
DN100 Multistage Water Pump Ring,
Multistage Water Pump 100m3/H,
Cast Iron multistage ring section pump
Horizontal Ring Section Multistage Centrifugal Water Pump D85-45X2
The D series Multistage Ring Section Centrifugal Water Pump is a utility-grade, high-pressure, ring section pump with heavy duty, segmental ring, diffuser design. Axial thrust balance device with stacked rotor construction. Suitable for boiler feed pump and high building, long distance water transferring.
It is a radially split, segmented casing, multistage pump designed with modular interstage components. These identical components can be assembled to produce pumps of varying numbers of stages, hydraulics, materials, and configurations to meet the customer’s specific requirements. Its multiple suction nozzle and discharge nozzle orientations allow the D to adapt to multiple piping installations and provide the piping designer with flexibility in plant layout.
Horizontal, radially split, ring section pump with radial impellers, single or double flow entry, multistage. The stages are sealed against each other by O rings or by metallic sealing faces and fastened by tie bolts.
Thrust compensation by the hydraulic balancing device located at the discharge side. Balancing by disc or double piston.
Packed stuffing box uncooled or cooled.
Mechanical seal uncooled, with jacket cooling, seat ring cooling, injection or circulation.
The shaft is provided with exchangeable shaft sleeve in the shaft seal area.
* High efficiency, low NPSH impellers to match customer needs are used for all stages, providing modularity, top efficiency and ideal suction performance.
* Double volute a last stage reduces the radial thrust and increases overall efficiency.
* Replaceable stationary PEEK wear parts used to increase efficiency and reduce main-tenance.
* Product lubricated bearing at both DE and NDE to make the pump compact, reliable and easy to maintain.
|Flow Capacity||55-100 m3/h||Delivery Head||78-459 m|
|Inlet/Outlet Dia.||DN100/DN100 mm||Working Pressure||≤ 6.88 MPa|
|Liquid Temperature||0 - 80 ℃||Driven By||Electric Motor / Diesel Engine|
|Seal Type||Mechanical seal / Gland packing||Liquid||Clean water or similar|
|Material of Construction||Cast Iron / Cast Steel / S.S304 / S.S316 / Duplex S.S2205|
Contact Person: Johnson