Payment & Shipping Terms:
|Flow Capacity:||185-335m3/h||Delivery Head:||76-423m|
|Inlet/Outlet Dia.:||200mm/200mm||Working Pressure:||<6.345MPa|
|Liquid Temperature:||0-80 ℃||Application:||Clean Water, Sewage, Hot Water, Corrosive Liquid, Mining Water|
|Material:||Cast Iron, Cast Steel, S.S304, S.S316, Duplex S.S2205||Dirven By:||Electric Motor / Diesel Engine|
|Seal:||Gland Packing/Mechanical Seal||Frequency:||50/60Hz|
423m Multistage Water Pump,
Multistage Water Pump 60Hz,
423m multistage ring section pump
The D series Multistage Ring Section Centrifugal Water Pump is a high pressure, ring sectional centrifugal pump with heavy duty, segmental wear ring, diffuser design. Axial thrust balance device with stacked rotor construction. Suitable for boiler feed pump, long distance water transferring, high building water supply.
The impellers are stacked in single direction on the same pump shaft. The rotor is balanced by the specially designed balance drum device. The rotors are perfectly dynamically balanced and the maximum stages can be up to 12stages.
Horizontal, radially split, ring section pump with radial impellers, single or double flow entry, multistage. The stages are sealed against each other by O rings or by metallic sealing faces and fastened by tie bolts.
Thrust compensation by the hydraulic balancing device located at the discharge side. Balancing by disc or double piston.
The balancing device on centrifugal pumps is designed to fully or partially compensate axial thrust generated by the pump rotor. Designs incorporating a single balance drum or double drum require a thrust bearing to absorb the residual thrust.
The difference between a balance disk and a balance drum is whether the primary pressure drop is taken across a radial clearance (drum) or an axial face (disk). Some pumps use a combination drum/disk that incorporates both radial and axial clearances.
|Flow Capacity||185-335 m3/h||Delivery Head||76-423 m|
|Inlet/Outlet Dia.||DN200/DN200 mm||Working Pressure||≤ 6.345 MPa|
|Liquid Temperature||0 - 80 ℃||Driven By||Electric Motor / Diesel Engine|
|Seal Type||Mechanical seal / Gland packing||Liquid||Clean water or similar|
|Material of Construction||Cast Iron / Cast Steel / S.S304 / S.S316 / Duplex S.S2205|
Contact Person: Johnson