Horizontal Ring Section Self-Balancing Multistage Centrifugal Mining Water Pump MD85-80X8P
Water is a constant threat to mining, whether it enters a mine through infiltration or comes from a storm. Mine operators must be able to manage the water where it is known to exist and quickly alleviate the problems associated with it when it rises unexpectedly. Mine dewatering pumps generally need to pump water horizontally-from a smaller sump to a larger sump-or vertically from the bottom of the pit up to the elevation of the mine, and then horizontally to a discharge point. The pumps most commonly found in mine operations include vertical turbine pumps, electric and hydraulic submersible pumps, horizontal multistage centrifugal pumps and horizontal single-stage centrifugal pumps.
Our MD series self-balancing multistage ring section centrifugal mining water pump is a innovative product which designed to remove the mechanical balance drum, balance disc, balance socket and related parts, and achieve the balancing function by reverse circulation water pipe.
The external bypass pipe at the outside of the pump is designed for water re-flushing, it will make the water flowing directly into the end of the pump from the suction side, and then return to the discharge section at the middle of the pump, the axial force will be balanced by water flowing from both sides of the discharge section.
It will balance the axial thrust caused by the high pressure impeller from both sides and escape the mechanical wears out as well as overloaded axial force of the traditional multistage pump, and ensure the stability and endurability of the pumpset.
No two mine dewatering operations are the same, but it is important to try to understand the frequency and contributing factors to water infiltration, and to attempt to alleviate those issues through adequate mine planning and dewatering equipment. When evaluating the effectiveness of an existing or developing mine dewatering plan, consider the solids Handling Capability and Acid Content- Mine water can be laden with silt, sand and rock. Pumps with solids handling capabilities have a longer life cycle. In addition, choosing a pump with corrosive-resistant wearparts, such as stainless steel, helps to combat the destructive chemical breakdown associated with the high acid content in acidic mine drainage.
||≤ 13.2 MPa
||0 - 120 ℃
||Electric Motor / Diesel Engine
||Mechanical seal / Gland packing
||Clean water or similar
|Material of Construction
||Cast Iron / Cast Steel / S.S304 / S.S316 / Duplex S.S2205
Main Parts Configuration
The MD/ZD series self-balancing multistage ring section centrifugal mining water pump could be applied to transfer different kinds of liquid by customized wet parts, here followed our recommendation:
||Mechanical Seals/Gland Packing Seals
* boosting in General Industries of chemical process
* boiler water feeding
* Food & beverage
* Sewage Treatment Plant
* Marine & offshore
* Sea Water Desalination
* Petrochemical processing
* Clear liquids
* Commercial water supply, High building water supply
* Mining water discharge
* Supper long distance water transferring
We offer a variety of service activities:
* Remote online supporting and diagonosis. Onsite consulting before & after sales.
* Repair & Maintenance - incidental service visits on location to breakdown repairs and maintenance on a 24-hour contract basis for products made by Sanchang or by any other manufacturer.
* Original spare parts - we provide stock control of spare parts for groups of pumps (total care maintenance). We are able to respond quickly and flexibly thanks to the availability of our own foundry.
* Training of our worldwide customers in the field of installation, operation and maintenance.