Payment & Shipping Terms:
|Flow Capacity:||1400-2340m3/h||Delivery Head:||14-25m|
|Inlet/Outlet Dia.:||600/500mm||Working Pressre:||<0.375MPa|
|Liquid Temperature:||0-80 ℃||Application:||Clean Water, Sewage, Hot Water, Corrosive Liquid, Mining Water|
|Material:||Cast Iron, Cast Steel, S.S304, S.S316, Duplex S.S2205||Driven By:||Electric Motor / Diesel Engine|
|Seal:||Gland Packing/Mechanical Seal||Frequency:||50 /60 Hz|
6kV Explosion Proof Centrifugal Pump,
Explosion Proof Centrifugal Pump 1470rpm,
1470rpm Radial Split Casing Pump
Single Stage Double Suction Horizontal Split Case Water Pump 10SH-6 (360-612m3/h @ 56-71m) for Raw Water
S/SH Series pumps are double suction horizontal split case centrifugal pump, they are single-stage, double suction, horizontally mounted, applied for general water supply, booster service, municipal waterworks, condenser cooling, water circulation, industrial service, building service, chemical plant, power plants etc.
Pump casings are horizontally split at the shaft centerline to simplify inspections and maintenance. Double suction impellers are dynamically and hydraulically balanced and are available in bronze, stainless steel, and other special alloys for specific applications. The cartridge type bearing housings allow a short bearing span for minimum shaft deflection. Oversized heavy duty ball bearings provide long, trouble-free service in continuous operations.
Split case pumps have been specifically engineered to meet the needs and requirements of the oil, gas and process industries. Tough and robust products are required which have proven long term reliability and benefits, enabling them to perform in often arduous operational and environmental conditions - where dependability is of paramount importance.
The shapes of impeller and pump casings are optimized to achieve the highest possible efficiency for the specific design flow rate and pressure head. Off design characteristics are optimized to give each pump a wide operating range, ensuring that cavitation limits are not exceeded.
The pumps are easy to maintain as the upper half can be removed without dismantling pipe connections and driver components so that the alignment is not disturbed. In addition, our service department offers financially attractive service and maintenance contracts, which guarantee that downtime in pumping installations is kept to a minimum.
By using double suction impellers and double volute casings Sanchang supplies pumps with low vibration and noise levels. A double volute reduces radial thrust, resulting in longer service life for bearings and seals.
Parameters of 500S22
|Flow Capacity||360-612 m3/h||Delivery Head||56-71 m|
|Inlet/Outlet Dia.||250/200 mm||Working Pressure||≤ 1.1 MPa|
|Liquid Temperature||0 - 80 ℃||Driven By||Electric Motor / Diesel Engine|
|Seal Type||Mechanical seal / Gland packing||Liquid||Clean water or similar|
|Material of Construction||Cast Iron / Cast Steel / S.S304 / S.S316 / Duplex S.s2205|
|Impeller Dia. (mm)||Weight (kg)|
General residential & industrial water supply & transferring;
Agricultural irrigation & drainage, Flood discharge & Emergency drainage;
Civil water treatment, Waterworks, Sea water desalination;
Air-conditioning, Fire-fighting facilities, High building water supply;
Oil & Gas & Chemical processing, Abrasive liquids transferring;
Power plant water circulation, Cooling tower & Hot water transferring
Mining, Boiler feeding, etc.
Contact Person: Johnson